Search
-
PICO-APL4 eDP Connector info
PICO-APL4 has variant to support eDP panel. (PICO-APL4-A10-0002) Please check detail in AAEON homepage as following. https://www.aaeon.com/en/p/pico-itx-boards-pico-apl4#downloads Here is information about the eDP connector on the board. It helps to check cable connection for eDP Panel application. CN19 on board with KEL… -
PICO-APL1 LVDS BIOS setting for panel resolution/ channel / color depth.
There are panel resolution and color depth settings for LVDS interface in the BIOS of PICO-APL1 for different compatible displays that may appear in the application. Panel type sets the resolution of the target display Color depth sets the LVDS channel and color of the target display Further explanation is provided here to… -
PICO-APL1 onboard LEDs and optional external LED
There are 3 LED indicators on the PICO-APL1 board. Red LED indicates standby voltage ready Green LED indicates operating voltage ready Blue LED is the hard disk indicator In addition to the LEDs on the board, the PICO-APL1 can connect external LED via front panel CN3. (Info from PICO-APL1 Manual) Here is schematic of CN3… -
PICO-APL1 Thermal Report and Temperature Montior
PICO-APL has operating temperature 0~60 °C below link is one thermal report based on intel N4200 CPU with 8GB RAM under windows 10 with PassMark Burn in Test 8.1 Pro. It shows thermal image and measure key component temperature. https://www.dropbox.com/s/qnwe8bbg4d3rg60/PICOAPL1THR.pdf?dl=0 (PICOAPL1THR.pdf) AAEON also… -
PICO-KBU4 3D drawings (with active FAN / with passive Heat Spreader)
You can download 3D file for PICO-KBU4 from Community directly. https://downloads.aaeon-community.com/download/kbu4-drawing/ (pico-kbu4_3d-model.stp) It is standard with active Fan. For some application, customized Fan could be used with our standard Heat spreader Here I provide a 3D file for PICO-KBU4 with passive heat… -
Switch COM2 RI/5V/12V
PICO-APL1 COM2 support switch RI/+5V/+12V. (CN17 pin 8 , Ring in default ) PICO-APL1 has BOM selection to switch RI/5V/12V for COM2 per 0 Ohm resistors R256/R248/R250. In default is only R248 assembled on board (RI in default). So if it needs switch to 12V or 5V, it could do followings 1# From RI to 12V -> Remove R248 and… -
Visual Odometry on a Quadcopter using the AAEON PICO-APL3
Monocular Visual Odometry System that can be built using off the shelves components and open-source software developed by the ETH Zurich Autonomous Systems Lab. The software is running on a AAEON PICO-APL3 based Companion Computer running UBUNTU 16.04 and ROS KINETIC. The VIO system is controlling a Linux Based BeagleBone… -
SDK to support GPIO, watchdog, smart fan in Windows
-
3D stp file for PICO boards
-
Built-in TPM on PICO-APL3?
-
BIOS customization
-
online support for industrial computer board
-
Pico-KBU4 Vs APL4 : Benchmark ?
-
PICO-ITX : "BIO" Expansion
-
PICO-ITX Benchmark VS UP Squared
-
PICO-ITX : supported BIOS
-
Pico-ITX & AI Core X ( Intel Myriad X )
-
PICO-APL4: I2C/SMBus support
dears, I am planning to build-up an IIoT automation controller based on APL4 (the two GbLAN helps a lot). I want to mix the data acquisition from existing sensors and from new added detectors. I will come back later to the bigger picture about my project. At the moment, I want to verify the feasibility of interfacing I2C… -
Added support for Yocto 2.3 pyro on AAEON Community Pico boards
All Pico boards available in the AAEON Community are supported in Yocto 2.3 pyro using the meta-layer available on Github: https://github.com/emutex/meta-aaeonc/tree/pyro With the Yocto build system you can create a custom distribution tailored for any vertical application using the many software solutions already… -
Available Software and Documentation