PICO-KBU4 — AAEON Community https://forum.aaeon-community.com/ Thu, 14 May 2026 02:04:41 +0000 en PICO-KBU4 — AAEON Community PICO-KBU4 3D drawings (with active FAN / with passive Heat Spreader) https://forum.aaeon-community.com/discussion/32/pico-kbu4-3d-drawings-with-active-fan-with-passive-heat-spreader Mon, 29 Apr 2019 13:23:12 +0000 PICO-KBU4 Han 32@/discussions You can download 3D file for PICO-KBU4 from Community directly.
https://downloads.aaeon-community.com/download/kbu4-drawing/
(pico-kbu4_3d-model.stp)
It is standard with active Fan.

For some application, customized Fan could be used with our standard Heat spreader
Here I provide a 3D file for PICO-KBU4 with passive heat spreader for reference.
https://tinyurl.com/yxslz4rf
(pico-kbu4_w-HSP.stp)

]]> PICO-KBU4 How to use Bitlocker under win10 https://forum.aaeon-community.com/discussion/53/pico-kbu4-how-to-use-bitlocker-under-win10 Wed, 18 Sep 2019 14:24:14 +0000 PICO-KBU4 Han 53@/discussions PICO-KBU4 had no TPM chip, it could still use Bitlocker .
Please refer slide from following link for using Bitlocker without a TPM under WIN10.

https://tinyurl.com/y4a5cv52
"PICO-KBU4-Bitlocker-without-TPM.pdf"

]]> PICO-KBU4 Uart/COM Port baud rate https://forum.aaeon-community.com/discussion/52/pico-kbu4-uart-com-port-baud-rate Wed, 18 Sep 2019 14:12:52 +0000 PICO-KBU4 Han 52@/discussions

RS232 max data throughput is 1Mbps, RS422/RS485 is 10Mbps, and 1Mbps is configured till a Baud Rate 921600.

]]> PICO-KBU 4K resolution support https://forum.aaeon-community.com/discussion/48/pico-kbu-4k-resolution-support Mon, 26 Aug 2019 15:09:08 +0000 PICO-KBU4 Han 48@/discussions PICO-KBU use graphic from Intel CPU (Intel HD Graphic 620), which support 4K resolution.
for example , PICO-KBU4-A10-0004 has CPU i7-7600U, according to Intel info it support 4K resolution Video.

]]> PICO-KBU4 Heat Sink assembly screw and torque range https://forum.aaeon-community.com/discussion/42/pico-kbu4-heat-sink-assembly-screw-and-torque-range Tue, 18 Jun 2019 15:42:17 +0000 PICO-KBU4 Han 42@/discussions PICO-KBU4 Heat Sink (PICO-KBU4-FAN01) use M3 screw and the torque range is 4-6kgf-cm.

]]> SDK to support GPIO, watchdog, smart fan in Windows https://forum.aaeon-community.com/discussion/26/sdk-to-support-gpio-watchdog-smart-fan-in-windows Thu, 06 Dec 2018 11:21:50 +0000 PICO-KBU4 Lake_Dance 26@/discussions Hello,

Do you provide SDK to support GPIO and other setting in Windows?

]]> Pico-KBU4 Vs APL4 : Benchmark ? https://forum.aaeon-community.com/discussion/21/pico-kbu4-vs-apl4-benchmark Thu, 06 Dec 2018 09:45:01 +0000 PICO-KBU4 WalterWhite 21@/discussions Hi All,

did anyone have benchmark between the PICO-KBU here below ( although the link address looks wrong - N3350 ?? - the page contains the KBU board ):

https://www.aaeon-shop.com/industrial-boards/75-pico-itx-board-with-intel-celeron-n3350.html

and the PICO-APL

https://www.aaeon-shop.com/industrial-boards/70-pico-itx-board-with-intel-pentium-n4200.html

Thanks

]]> Available Software and Documentation https://forum.aaeon-community.com/discussion/14/available-software-and-documentation Thu, 01 Nov 2018 14:26:20 +0000 PICO-KBU4 Daniele Cleri 14@/discussions Check out our Guides and Tutorials available on AAEON Wiki:

Also the new Downloads section now includes all documentation, drivers and software you might need for your PICO-KBU4:
https://downloads.aaeon-community.com/categories/pico-kbu4/

]]> PICO-KBU4 Specifications https://forum.aaeon-community.com/discussion/13/pico-kbu4-specifications Thu, 01 Nov 2018 14:24:31 +0000 PICO-KBU4 Daniele Cleri 13@/discussions

You can find a table with all the board specifications from this link: https://www.aaeon.com/en/p/pico-itx-boards-pico-kbu4

]]>